Switch/Lamp modules

The module series RSL.... can be used to directly command relays or power contactors up to 230V (manual override) and to signalize "Fault"- and "Run"- messages (e.g. feedback from the power contactor 24V DC / AC). This module provides up to 2 switches, each up to 6 positions. If you need 7 to 12 positions, there can only be 1 switch (mounted at the lower position). You can order the module with up to 6 Duo-LEDs (red, green or yellow). Their colors can be adjusted by the means of jumper. RSL model code: 1. digit: number of LEDs upper position 2. digit: positions of upper switch 3. digit: number of LEDs lower position 4. digit: positions of lower switch You can adjust the function of the inputs by the means of jumper as well. There you can choose between NC contact and NO contact principle. Yellow and red LEDs cause a collective fault message via the plug-in 5-pole bus system on the collective fault module RSM. There are two group outputs (+24V DC) for creating different priority levels (group 1 = LED 1-3, group 2 = LED 4-6), which are activated by red or yellow coded inputs. You can trigger a lamp test over the plug-in 5-pole bus system with the RSM... module.