RPK2020 - Motor control module 4xone-stage, run/fault, - Input signal for triggering relay 24VAC/DC, 15mA

Product number: 00001281

Manufacturer: romutec Steuer- und Regelsysteme GmbH

Product information "RPK2020 - Motor control module 4xone-stage, run/fault, - Input signal for triggering relay 24VAC/DC, 15mA"

The RPK series .... serve as control modules with manual override function for control of one to four 1-speed motors. There is a rotary switch for each drive with "Auto"-"Off"-"Man". There is an extra layer for the "Auto"-Position, in order to indicate manual overwrite to the DDC. In Order to get this indication in the porsitions "Off" and "Man" you have to put an"-H0" at the end of the typ-Code (e.g. RPK2020-H0). To signal the status "Running" green LEDs are installed. For error messages red LEDs are available that produce a collective fault when wired with the central module RSM. The LEDs are driven with + 24V DC / AC. You can drive power contactors directly with a potential free contact (note contact load instructions). In switch position "Auto" the relais are controlled from the DDC / PLC + 24V DC / AC. If the DDC fails, you can control the system by means of switches. You can test the lamps with the RSM module connected via the 5-pole bus cable. RPK0010 - 1 drive RPK1010 - 2 drives RPK1020 - 3 drives RPK2020 - 4 drives

Technische Daten

Technische Daten Beschreibung

Supply voltage: 24V DC / AC ± 10% Power consumption: max. 110 MAPRO relay 15 mA) (Per LED about 5 mA) Inputs: Control with 24V DC / AC Signalling: Fault LEDs, color red Run LEDs, color green Relais outputs: Switching voltage, max .: 250 VAC / 30 VDC Switching current, max. (Resistive): 5 A Switching capacity: 625 VA / 150 W Rated load (resistive): 2.5 A / 250 VAC; 5 A / 30 VDC Life at rated load 50,000 operations without load 5,000,000 operations Automatic or switch to local feedback: Switching capacity: 1 VA / 1 W Switching voltage max. 50V AC / DC Switching current: 20mA Quiescent current: max. 1A Lifespan min. 20,000 / 15,000 switching cycles

Environmental conditions: Operating temperature 0 ... 50 ° C Transport and storage temperature -20 ... + 70 ° C Relative humidity 5 ... 95%, non-condensing Protection class: IP 40, when using transparent coverage up to IP 54 Dimensions: Width 8TE(40.5mm), height 3HE(129mm), for mounting into 19" racks Installation depth <80 mm Terminals: 2.5mm2 pluggable terminal CE Conformity EN 61000-4-2 / IEC 801-2 Electrostatic Discharge ESD Contact discharge 8 kV / air discharge 8 kV EN 61000-4-5 / IEC 801-5 Surge AC supply voltage 4 kV, 0.5 kV DC Signal lines 2 kV EN 61000-4-4 / IEC 801-4 Burst Inputs - Outputs +/- 2 kV Supply voltage AC / DC +/- 2 kV

Guides

Guides for immediate download