Collective fault modules

The collective fault module RSM3003 is managing the signals which were received from signalizing modules and motor control modules via the plug-in bus system. If a fault is received via the bus system the collective alarm-LED begins blinking. The collective alarm can be passed on via a potential free changeover contact to a higher control center. Button "Quit fault": Externally saved fault-reports like frost, fan belt, etc. can be quitted with the button "Quit fault", via a potential-free NO contact. In the same scenario there is the potential from clamp 5 available to make a reset of extern devices at clamp 7. Button "Lamp-test": By pushing the "Lamp-test" button you can test all LEDs of signalizing modules and motor modules connected to the RSM via the plug-in bus system (max. 300 reports). The lamp test can also be triggered externally via clamp. Button "Quit horn": When a fault message is received a potentail free NO contact is closed. You can connect an external horn to this contact. By pushing the "Quit Horn" button or externally via clamp the horn can be disabled. There are 2 additional LEDs for visualisation of various status signals. You can choose their color between red/green/orange by setting the jumper. The system is also fully functional without the RSM module, if the lamp test and the collective alarm-LED are not needed.